Load cells

Flat washer type load cells suitable for rolling mills. Rated Capacity: 1 MN to 5 MN Diameter: 241 mm (1 MN), 355 mm (2 MN to 5 MN) Nonlinearity: Within ±1% RO

Compact and thin center hole type load cells ideal for measuring bolt axial force. Rated Capacity: 60 to 400 kN Applicable Bolt: M12 (60 kN) to M30 (400 kN) Nonlinearity: Within ±2% RO

Small-size load cells made from stainless steel for use as detectors for systems requiring corrosion resistance. Rated Capacity: 500 N to 20 kN Diameter: 28 mm (500 N to 2 kN), 43 mm (5 kN to 20 kN) Nonlinearity: Within ±0.1% RO

Ultra-small and lightweight load cells. It can be used by adhering it, fitting it into a recess. Rated capacity: 5 N to 1 kN diameter: 12 mm (5 to 50 N), 20 mm (100 N to 1 kN) Nonlinearity: Within ±1% RO

Ultra-small and lightweight high-temperature load cells. Rated Capacity: 50 N to 2 kN Diameter: 10 mm (50 to 200 N), 16 mm (500 N to 2 kN) Nonlinearity: Within ±0.3% RO

Compact and lightweight load cells that can be recessed or used fixed with a mounting band. Rated Capacity: 5 kN to 50 kN Diameter: 12±0.1mm （5, 10 kN), 16±0.1mm (20 kN), 22±0.2mm (50 kN) Nonlinearity: Within ±0.5% RO for 5 kN to 10 kN, within ±1% RO for 20 kN to 50 kN

Ultra-small and lightweight load cells. Rated Capacity: 10 N to 2 kN Diameter: 10 mm (10 to 200 N), 16 mm (500 N to 2 kN) Nonlinearity: Within ±0.5% RO

Compact and lightweight load cells that can be used by adhering it, fitting it into a recess. Rated Capacity: 2 kN to 20 kN Diameter: 21 mm Nonlinearity: Within ±1% RO, within ±2% RO for 20 kN

LT-FH load cells enable continuous operation under temperatures as high as 150°C with no external cooling. Rated capacity: 5 kN to 50 kN Diameter: 68 to 96 mm

LT-FL load cells enable operation at ultra-low temperatures from -196°C. Rated capacity: 500 N to 50 kN Diameter: 68 mm (50KFL to 2TFL), to 96 mm (5TFL) Nonlinearity: Within ±0.5% RO

Tension load cells for cranes that can be used as detectors for jib crane weighing systems and for general tension measurement. Rated Capacity: 20 to 500 kN Diameter: 410 mm (20 kN) to 670 mm (500 kN) Nonlinearity: Within ±1% RO

The LTS-A is a load cell, for measuring very small loads in the direction parallel to the mounted surface. It is easy to handle. Rated Capacity: 500 mN to 20 N Nonlinearity: Within ±0.5% RO Hysteresis: Within ±0.5% RO

The LVS-A is a load cell, for measuring very small loads in the direction vertical to the mounted surface. It is easy to handle. Rated Capacity: 50 mN to 20 N Nonlinearity: Within ±0.5% RO Hysteresis: Within ±0.5% RO

Load cells mounted in place of a pulley axle, that allow measuring loads hanging from cranes. Rated Capacity: 10 to 500 kN Diameter: 50 mm (10 kN, 20 kN) to 95 mm (500 kN) Nonlinearity: ±1 to 2% RO ((Depends on user's installation conditions.)

Load cells suitable for measurement of the tensile force of ropes, etc. Rated Capacity: 20 kN to 50 kN Diameter: 270 mm Nonlinearity: Within ±0.5% RO

Load cells that use a diaphragm using a straight beam for highly accurate measurement even at small capacities. Rated capacity: ±50 to 200 N Diameter: 93 mm Nonlinearity: Within ±0.3% RO

LUB-B is a beam-type load cell developed as a detector of weighing system. Rated Capacity: 50 N to 20 kN Diameter: 42 mm (50 N to 2 kN), 67 mm (5 kN, 10 kN), 84 mm (20 kN) Nonlinearity: Within ±0.03% RO for 50 N to 500 N, within ±0.05% RO for 1 kN to 20 kN

Beam load cells that can be used as load detectors in weighing systems. Compared to conventional models (LUB-B), it is more affordable. Rated capacity: 5, 20 kN Dimensions: 38 × 174, 53 × 206 mm Nonlinearity: Within ±0.05% RO

LUK-A is a a thin load cell for measuring tension or compression loads. It can be installed to where the height is limited. It also suitable for fatigue test where repeativite loads are applied continuously. Rated Capacity: ±5 kN to ±2 MN Diameter: 77 mm (±5 kN to ±10 kN), 107 mm (±20 kN), 127 mm (±50 kN), 157 mm (±100 kN), 227 mm (±200 kN), 307 mm (±500 kN), 375 mm (±1 MN), 560 mm (±2 MN) Nonlinearity: Within ±0.1% RO for 5 kN to 200 kN, within ±0.2% RO for 500 kN to 2 MN

Compact and lightweight tension/compression load cells that are easy to use. Rated Capacity: ±50 N to ±2 kN Diameter: 28 mm Nonlinearity: Within ±0.5% RO