Load cells

The LUXT-A is a compact load cell that enables to continuously operate under temperatures up to 195ºC. Rated Capacity: ±500 N to ±2 kN Diameter: 28 mm Nonlinearity: Within ±0.5% RO

The LC-V is a compact & lightweight load cell for measuring compressive loads. It is easy installation into existing facilities. The Steady Brace ensures to cancel transverse loads resulted from horizontal displacement. Rated Capacity: 50 kN to 200 kN Diameter: 68 mm (50 kN), 78 mm (100 kN), 98 mm (200 kN) Nonlinearity: Within ±0.05% RO

The LCTA-A is a thin load cell, capable of fixing on either top or bottom. It is excellent in vibration and shock resistant. It can withstand lateral loads up to 20% of the rated capacity. Rated Capacity: 500 N to 3 kN Diameter: 150 mm Nonlinearity: Within ±0.05% RO

The LCV-A is a compact load cell for measuring compressive large loads. It is Easy installation into existing facilities. It is hermetically-sealed structure with inert gas filled in. Rated Capacity: 500 kN, 1 MN Diameter: 126 mm (500 kN), 146 mm (1 MN) Nonlinearity: Within ±0.1% RO

The LCX-A-ID is a stainless-steel load cell, for measuring compressive loads. It is compact & lightweight. Rated Capacity: 500 N to 20 kN Diameter: 28 mm (500 N to 2 kN), 43 mm (5 kN to 20 kN) Nonlinearity: Within ±0.1% RO

The LMB-A is an utra-small load cell for measuring compressive loads. Rated Capacity: 10 N to 2 kN Diameter: 10 mm (10 to 200 N), 16 mm (500 N to 2 kN) Nonlinearity: Within ±0.5% RO

The LMBT-A is an ultra-small load cell for measuring compressive loads. Its operating temperature is up to 100ºC. Rated Capacity: 50 N to 2 kN Diameter: 10 mm (50 to 200 N), 16 mm (500 N to 2 kN) Nonlinearity: Within ±0.3% RO

The LMC-A is a compact & lightweight load cell for measuring compressive loads. Rated Capacity: 5 kN to 50 kN Diameter: 12±0.1mm （5, 10 kN), 16±0.1mm (20 kN), 22±0.2mm (50 kN) Nonlinearity: Within ±0.5% RO for 5 kN to 10 kN, within ±1% RO for 20 kN to 50 kN

The LMR-S-SA2 is a compact & lightweight load cell for measuring compressive loads. Rated Capacity: 2 kN to 20 kN Diameter: 21 mm Nonlinearity: Within ±1% RO, within ±2% RO for 20 kN

The LTS-A is a load cell, for measuring very small loads in the direction parallel to the mounted surface. It is easy to handle. Rated Capacity: 500 mN to 20 N Nonlinearity: Within ±0.5% RO Hysteresis: Within ±0.5% RO

The LVS-A is a load cell, for measuring very small loads in the direction vertical to the mounted surface. It is easy to handle. Rated Capacity: 50 mN to 20 N Nonlinearity: Within ±0.5% RO Hysteresis: Within ±0.5% RO

The LUB-B is a beam-type load cell developed as a detector of weighing system. Models of capacity from 1kN to 20 kN are made of special stainless steel. Rated Capacity: 50 N to 20 kN Diameter: 42 mm (50 N to 2 kN), 67 mm (5 kN, 10 kN), 84 mm (20 kN) Nonlinearity: Within ±0.03% RO for 50 N to 500 N, within ±0.05% RO for 1 kN to 20 kN

The LUK-A is a a thin load cell for measuring tension or compression loads. It can be installed to where the height is limited. It also suitable for fatigue test where repeativite loads are applied continuously. Rated Capacity: ±5 kN to ±2 MN Diameter: 77 mm (±5 kN to ±10 kN), 107 mm (±20 kN), 127 mm (±50 kN), 157 mm (±100 kN), 227 mm (±200 kN), 307 mm (±500 kN), 375 mm (±1 MN), 560 mm (±2 MN) Nonlinearity: Within ±0.1% RO for 5 kN to 200 kN, within ±0.2% RO for 500 kN to 2 MN

The LUR-A-SA1 is a load cell for measuring tension or compression loads. Rated Capacity: ±50 N to ±2 kN Diameter: 28 mm Nonlinearity: Within ±0.5% RO

The LUX-B-ID is a compact stainless-steel load cell with waterproof connector for measuring tension or compression loads. Models for withstand to repeated bending (Flexible cable) are available. Rated Capacity: ±50 N to ±20 kN Diameter: 43 mm Nonlinearity: Within ±0.1% RO for 5 kN to 20 kN, within ±0.15% RO for 50 N to 2 kN

The LCW-C-SA3 is a thin washer-type load cell. Rated Capacity: 10 kN to 300 kN Diameter: 80 to 188 mm (Depends on the models) Nonlinearity: Within ±1% RO

The LCW-E-S is a flat washer-type load cell. It is high stability and capable of operating under harsh conditions. Rated Capacity: 1 MN to 5 MN Diameter: 241 mm (1 MN), 355 mm (2 MN to 5 MN) Nonlinearity: Within ±1% RO

The LCW-D-S is a flat washer-type load cell with integrated cable fitting metal. It is high stability and capable of operating under harsh conditions. Rated Capacity: 1 MN to 5 MN Diameter: 241 mm (1 MN), 355 mm (2 MN to 5 MN) Nonlinearity: Within ±1% RO

The LUR-B-SA1 is load cell for measuring loads applied to jacks. Rated Capacity: ±10 kN to ±2 MN Diameter: 100 mm (±10 kN), 110 mm (±20 kN), 125 mm (±30 kN, ±50 kN), 175 mm (±100 kN), 255 mm (±200 kN, ±300 kN), 330 mm (±500 kN), 430 mm (±1 MN), 530 mm (±1.5 MN), 590 mm (±2 MN) Nonlinearity: Within ±0.2% RO for 10 kN to 200 kN, within ±0.5% RO for 300 kN to 2 MN

The LTP-S-S is a pin-type load cell for measuring crane hanging loads. It can be mounted in place of the axis of crane's pulleys. Rated Capacity: 10 to 500 kN Diameter: 50 mm (10 kN, 20 kN), 55 mm (50 kN), 60 mm (100 kN), 70 mm (200 kN), 95 mm (500 kN) Nonlinearity: ±1 to 2% RO (Depends on user's spec.)