Soil Pressure Transducer

These devices are load cell type earth-soil pressure transducers designed for resistance to structural bending, and are suitable for measuring wall surface earth pressure. Rated capacity: 500 kPa to 3 MPa Pressure-sensing Surface: φ24 mm Nonlinearity: Within ±2% RO

These devices are load cell type earth-soil pressure transducers designed for resistance to structural bending, and are suitable for measuring wall surface earth pressure. Rated Capacity: 500 kPa to 3 MPa Pressure-sensing Surface: φ24 mm Nonlinearity: Within ±2% RO

These compact soil pressure transducers (outer diameter φ30) are suitable for soil pressure distribution measurement and mode experiments during short-term experiments. Rated capacity: 200 kPa to 1 MPa Pressure sensing surface diameter: 23 mm Nonlinearity: Within ±2% RO

These compact soil pressure transducers (outer diameter φ30) are suitable for soil pressure distribution measurement and mode experiments during short-term experiments. Rated capacity: 200 kPa to 1 MPa Pressure sensing surface diameter: 23 mm Nonlinearity: Within ±2% RO

These transducers (outer diameter 200 mm) are used in the most standard measurement sites. BEE-A is used to measure underground soil pressure and is embedded in the core zone of a rockfill dam or standard berm. It can also measure 3-sided or 4-sided soil pressure. Rated capacity: 200 kPa to 2 MPa Pressure sensing surface diameter: 160 mm Nonlinearity: Within ±1% RO (200KP: Within ±3% RO)

These transducers (outer diameter 200 mm) are used in the most standard measurement sites. Rated capacity: 200 kPa to 2 MPa Pressure sensing surface diameter: 160 mm Nonlinearity: Within ±1% RO (200KP: Within ±3% RO)

These stainless steel soil pressure transducers are used to measure underground soil pressure. Rated capacity: 50 kPa to 1 MPa Pressure-sensing surface diameter: 80 mm Nonlinearity: Within ±2% RO (500KP, 1MP: Within ±1% RO)

These soil pressure transducers are strong against vibration, and are suitable for driving into sheet piles, steel pipe piles, etc. Rated capacity: 500 kPa, 1 MPa Pressure-sensing surface diameter: 70 mm Nonlinearity: Within ±1% RO

These wall-mounted soil pressure transducers are thin with the cable extending horizontally along the pressure sensing surface. Rated capacity: 100 kPa to 2 MPa Pressure sensing surface diameter: 95 mm Nonlinearity: Within ±1% RO

These load cell type transducers are designed for resistance to structural bending, and are suitable for measuring wall surface soil pressure. Rated capacity: 100 kPa to 5 MPa Pressure-sensing surface: 73 mm Nonlinearity Within ±1% RO

These load cell type transducers are designed for resistance to structural bending, and are suitable for measuring wall surface soil pressure. Rated capacity: 500 kPa to 5 MPa Pressure-sensing surface: 24.5 mm Nonlinearity Within ±2% RO

These load cell type transducers are designed for resistance to structural bending, and are suitable for measuring wall surface soil pressure. Rated capacity: 500 kPa to 5 MPa Pressure-sensing surface: 30 mm Nonlinearity Within ±2% RO

These load cell type transducers are designed for resistance to structural bending, and are suitable for measuring wall surface soil pressure. Rated capacity: 500 kPa to 5 MPa Pressure-sensing surface: 73 mm Nonlinearity Within ±1% RO

These devices are load cell type earth-soil pressure transducers designed for resistance to structural bending, and are suitable for measuring wall surface earth pressure. Rated capacity: 500 kPa to 3 MPa Pressure-sensing Surface: φ73 mm Nonlinearity: Within ±1% RO

These devices are load cell type earth-soil pressure transducers designed for resistance to structural bending, and are suitable for measuring wall surface earth pressure. Rated capacity: 500 kPa to 3 MPa Pressure-sensing Surface: φ24 mm Nonlinearity: Within ±2% RO

These devices are load cell type earth-soil pressure transducers designed for resistance to structural bending, and are suitable for measuring wall surface earth pressure. Rated capacity: 500 kPa to 3 MPa Pressure-sensing Surface: φ24 mm Nonlinearity: Within ±2% RO

These soil pressure transducers are designed to accurately measure earth or backfill pressure on the segment surface averaged over a wide surface area using the shield method, by attaching the pressure sensing surface based on the curve of the segment. Rated capacity: 500 kPa, 1 MPa Pressure-sensing Surface: Max. 450×750 Nonlinearity: Within ±1% RO